Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a narrow, practical how-to: Phil walks through physically hitching an SB 165 double-acting sickle bar mower to a tractor using a TYM T264, covering category 1/2 lift pin options, PTO shaft and safety chain connection, adjusting lift links to level the mower, and tightening anti-sway chains. It's not a review or demo of mowing performance, just the hookup procedure, useful mainly for owners who already bought this mower and need setup guidance.
Posted by Small Farm Innovations, a company that sells this forage equipment, so the video is instructional support for owners rather than an independent review.
Lower one lift arm into the lower hole, put the other in the upper hole, connect the PTO shaft first, adjust lift links to level the mower, then connect safety chain, top link, and anti-sway chains.
It works as either. Remove the cotter pin, slide the mechanism back, insert the lift arm, and reinsert the lynch pin or cotter pin to switch between category 1 and 2.
The transcript states this mower will fit small tractors on up to tractors with 200 horsepower.