Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →Focused entirely on the Kubota BX Swift Hatch loader removal and reinstallation process, this video walks through each step in sequence, leveling the bucket, releasing the legs, disconnecting the hydraulic coupler, backing out, and reversing it all to reattach. It also covers real-world troubleshooting: misaligned arms after hours of use, uneven ground, and hydraulic pressure issues. Best for BX owners who've never attempted a loader swap and want a confidence-building walkthrough.
Raise arms and curl bucket to release legs, lower bucket and legs to ground, raise arms again to pop mounting arms from cradle, back out about 12 inches, idle down, release hydraulic coupler, then back straight out.
After many hours of use, like 400 hours, things can get tweaked so the arms do not line up on flat ground like they would on a new machine.
Stab the bucket in the ground and push the tractor forward or backward slightly to tweak position, or park against a solid fence post for leverage.
If you try to connect or disconnect with pressures high, it won't work; turn the tractor off first to lower the pressure.