Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a step-by-step walkthrough of removing the FL 1805 loader from a Massey Ferguson DC 1723 EB, filmed from two angles. It covers setting the loader stands, lowering the frame, pulling the subframe pins, using the joystick to work the loader out of the saddles, and relieving hydraulic pressure before disconnecting the labeled A-B-C-D hose couplers. Useful for owners who need the actual mechanical procedure, not a product overview.
Set the loader stands, lower the frame near the ground, pull the subframe pins, use the hydraulics and joystick to work the loader out of each saddle, then relieve pressure and unplug the hoses.
With the tractor off, move the joystick each way to relieve pressure, since the hoses are easiest to unhook and hook back up once pressure is relieved.
The hoses are tagged A, B, C, and D, and a sticker on the fender shows how to plug them back in once disconnected.