Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A step-by-step installation walkthrough for the Kubota BX80 Series Front Quick Hitch, filmed by someone doing it for the first time. Covers hitch mounting, the long pin and cotter pin locking method, flat-face hydraulic coupler connections, mid-PTO driveshaft routing, and snowblower attachment including the PTO coupler lever and parking stand tip. Practical and honest about first-timer fumbling; most useful to BX owners tackling this swap themselves.
Pick up the hitch, hook the J-shaped pieces over the curves, push it flat under the tractor, then slide a long pin through to lock everything, securing it with a cotter pin.
Match the color-coded flat-face couplers, white to white and yellow to yellow, then center one on top of the other and push down to lock them in place.
If there is pressure in the lines, push the loader valve into float to release the hydraulic pressure on the tractor side, which makes the couplers easier to connect.
The narrator, doing it for the first time, said it took at most 10 minutes, and about 5 minutes once you know what you are doing.