Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →An owner-operator walks through buying and installing Pat's Easy Change quick-hitch system on his three-point hitch, solo. The video covers unboxing, shim selection, pin and U-bolt installation, width adjustment, and a live hook-on test. He also flags the arm-length trade-off (about 3.5 inches) and a potential PTO shaft clearance issue. Useful for anyone considering this specific product for solo implement swapping.
It slides onto the arms, a large pin goes through, four bolts with lock nuts secure it side to side, and a U-bolt with washers and double nut locks it from rotating.
Yes, it adds about three and a half inches to the arm length, which reduces lifting capacity slightly, though not enough to matter for the implements used here.
PTO shafts on implements like a rotary mower or snowblower may not be long enough to reach, possibly requiring small stub extensions to lengthen the shaft.
Not necessarily. The owner skipped it since his implements share the same width and instead used a cut piece of plywood to hold the correct spacing while hooking on.