Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a narrow how-to, not a baler review: a dealer rep walks through loading net wrap into the mesh system shared by Massey Ferguson 1700 and 2900 series balers, including cutting the tail, tying knots, tucking it into the roll, and closing the door. It also covers a specific troubleshooting tip: what to do if the mesh door sticks in the up position after an incomplete cycle. Best for owners actively loading net wrap.
Open the mesh door, drop the bottom plate, flip out the mesh brake, cut the net tail, tie knots in the two tails, tuck them between the mesh door and roll, then close the door and set the brake.
If the mesh cycle does not complete, the door stays in the up position with no gap behind the roll. On a 1745, put it in manual, select mesh, and manually feed it back to the home position.
No, that trial size roll usually only lasts about ten bales and is annoying, so it is normally thrown away and replaced with a full new roll before delivery.