Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →Brock returns after a rough first outing with his flail mower to apply viewer-suggested fixes, making this a practical troubleshooting video rather than a standard walkaround. He works through roller height, skid shoe angle, front-to-back float, and experiments with DIY side-to-side float using the three-point arms. Honest about what didn't fully work, it's most useful to owners already struggling with scalping or uneven cuts.
The roller was not set to touch the ground, which is what sets mowing height, not the skid shoe angle as many assumed.
Loosen a bolt and move it through one of six holes on each side of the frame until the roller sits on the ground at the right height.
Loosening the arm created 8 to 10 inches of float, but it was unnatural and too radical; pinning the sliding rail might make it usable.
Yes, the top link has a slot that lets the tail wheel lift over bumps by changing angle instead of lifting the whole mower.