Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a narrow how-to focused on one specific task: adjusting idle speed on the 1025R, 1023E, and 1026R via the Yanmar injection pump's idle stop bolt. It walks through loosening the lock nut with a 10mm wrench, turning the bolt while watching the tach, and retightening once idle reads the target 1,500 RPM. Useful for owners troubleshooting idle issues, not a general tractor overview.
Posted by the Tractor Hoarders channel, apparently an owner sharing a hands-on fix in response to questions seen in tractor forums and groups.
| John Deere 1025R | John Deere 1023E | |
|---|---|---|
| PTO horsepower | 18.2 hp | 16.2 hp |
| Loader lift capacity | 120R: 1,823 lbf at pivot point; H120: 1,724 lbf at pivot point | n/a |
| 3-point lift capacity | 758 lb | 1,433 lbs 1,433 lb |
| Hydraulic flow | 3.5 gpm | 3.5 gpm |
