Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a hands-on DIY walkthrough of replacing both fuel filters on a BX1850 (one under the tractor, one under the hood), prompted by a real sputtering/low-idle issue while snowblowing. It covers the tools needed, pinching and separating fuel lines, filter orientation, reassembly, and bleeding air from the system via the bleeder screw. Good for owners planning to do this exact repair themselves.
Posted by the MW3 Designs channel, an owner working on his own BX1850 rather than a dealer or professional shop.
Usually a sign of a dirty fuel filter, though it could also be fuel gelling up slightly.
A pinch tool for the fuel line, separator pliers to remove hoses, needle nose pliers for clips, hose pliers, a screwdriver, lighting, and a drip pan.
Loosen the bleeder screw, turn the key on, and watch for a steady stream of fuel instead of air to confirm it has primed.
Yes, the filters are directional and the new filter must be installed matching the flow arrow printed on it.