Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A step-by-step walkthrough of removing and reinstalling the FL9 front-end loader on Bobcat 40-series tractors. The presenter shares his own practiced sequence, lowering the bucket, pulling main pins, disconnecting hydraulic hoses last, then reversing the steps on reinstall, noting where his approach differs from the manual. Short and practical; most useful to new Bobcat 40-series owners tackling this task for the first time.
Set the parking brake, lower the bucket a few inches, pin it on both sides, pull the main pins, then disconnect the hydraulic hoses last before pulling the tractor out.
Always disconnect the hydraulic hoses last, after the bucket is pinned down and the main pins are removed.
Pull the tractor between the loader arms, reattach the color coded hydraulic hoses first, then line up the pin to straddle the saddle on the main bracket.