Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A homesteader walkthrough focused on the step-by-step process of attaching a post-hole auger to a three-point hitch, filmed in real time with honest fumbling included. Covers removing the top link, storing and greasing the PTO shaft, choosing the correct top-link hole on a Kubota, and briefly touching on lining up a straight hole. Practical and candid, best suited for first-timers who find the hookup process frustrating.
No, you take the top link off completely because a post hole auger does not use one, unlike regular three-point hitch equipment.
If your tractor has three holes, use the middle one. The top hole can hit the toolbox bar, and the bottom hole may interfere with the PTO cover.
Take it apart into its two pieces, grease the inside of the female side, and move it back and forth so it slides on easily next time.
Start with a manual post hole digger to create a cheater hole in the exact spot, then back the tractor up as the auger digs, keeping it straight with help from a spotter.