Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a narrow how-to on servicing the air cleaner housing on a John Deere 3033R/3039R/3046R, filmed on a real machine at 629 hours. It walks through unhooking the straps, pulling the primary filter, checking the rubber dump valve, and reinstalling the side panel, step by step. It skips specs, pricing, and general impressions entirely, making it most useful for current owners doing this specific maintenance task rather than shoppers.
Appears to be an owner-operator documenting hands-on maintenance on their own tractor as part of an ongoing service series.
Unhook the top and bottom straps to move the filter, remove the old primary element, install the new one with top marked correctly, then reinstall the cradle and side panel.
No, you can access the filter from the top without removing the side panels.
The secondary element very rarely needs to be replaced, but you should still inspect it during service.
It is a rubber nipple on the bottom of the filter housing. You squeeze it to dump out collected debris.
| John Deere 3033R | John Deere 3039R | John Deere 3046R | |
|---|---|---|---|
| PTO horsepower | 24.3 hp | 31.1 hp | 36.6 hp |
| Loader lift capacity | 300R: 2,855 lbf; 320R: 3,327 lbf (at pivot pin) | 300R: 2,855 lbf; 320R: 3,327 lbf (at pivot pin) | 300R: 2,855 lbf; 320R: 3,327 lbf (at pivot pin) |
| 3-point lift capacity | 2,530 lb at hitch ball | 2,530 lb at hitch ball | 2,530 lb at hitch ball |
| Hydraulic flow | 9.1 gpm | 9.1 gpm | 9.1 gpm |