Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A side-by-side dealer walkaround comparing a 2011 3032E and a 2016 3033R, with actual asking prices ($16K and $24K). Covers loader quick-attach differences, mid-PTO availability, transmission ranges, steering and seat comfort, joystick placement, folding fenders and garage clearance, and rear ballast. Concrete and practical, though not a working demo. Best for buyers actively deciding between these two models on a budget.
Good Works Tractors is a dealership and attachment retailer, so the video is a sales-environment walkaround with an implicit interest in moving these specific used units.
The 3032E with 225 hours was priced at 16,000 plus tax, while the 3033R with 430-460 hours was priced at 24,000 plus tax.
No, the 3032E has a fixed position loader that requires removing bolts to take off, unlike the 3033R which has a quick attach loader with a built-in parking stand.
No, the mid-PTO option is only available on the 3033R series, not the 3032E, and typically costs around 700 to 900 dollars to install.
The 3033R has a suspension seat, with air ride seats also offered, while the 3032E has a basic seat with a thinner pad and little suspension.
| John Deere 3033R | John Deere 3032E | |
|---|---|---|
| PTO horsepower | 24.3 hp | 25 hp |
| Loader lift capacity | 300R: 2,855 lbf; 320R: 3,327 lbf (at pivot pin) | 1,704 lb (at pivot pin) |
| 3-point lift capacity | 2,530 lb at hitch ball | Not Published |
| Hydraulic flow | 9.1 gpm | 5.3 gpm |
