Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This isn't a buyer's guide or review, it's a DIY fix for a specific annoyance on the TYM T474: no stop for the three-point lever. The owner walks through fabricating one from scrap channel iron, a bolt, and a knob, with exact dimensions (1 1/4" to 1 3/8" spacing) and an install demo setting mower height. Useful mainly for T474 owners wanting that specific mod, not general shoppers.
Posted by an owner-operator (BRC Fallow Deer Farm) who uses the tractor daily on his farm and shares hands-on modifications rather than sales pitches or formal reviews.
No, the TYM T474 does not have one. The owner says this is missing on the T474 and likely on many or all Tym models.
A piece of channel iron about 1 1/4 to 1 3/8 inches long, a 5/16 bolt, lock washer, nut, and a knob on top, with legs bent to 1 1/4 inch spacing.
Run the stop up, drop the mower to the desired height, tighten the knob. Raise the lever when needed, then drop it back to the same spot every time.