Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a six-month owner review of a CID 63-inch root rake grapple on a small (~30hp) John Deere-style tractor, not a dealer walkaround. It covers why he chose the shorter lower section, third-function valve installation and its quirks (can't tilt and grab simultaneously), real costs (~$3,500 all-in), firewood-clearing workflow, stump-pulling technique, and honest cons like a bent tooth and a punctured freeze plug. Good for buyers weighing grapple costs and real-world tradeoffs.
A longer lower section adds forward weight, which can cause traction loss on smaller tractors without fluid-filled tires, and increases risk of bending tilt cylinders on roots.
About $3,500 total: roughly $600 for the third function kit, $900 for hoses and installation, and $2,200 to $2,300 for the grapple itself.
No, the tractor will tilt or lift before it grabs. You have to lift slightly first, then push the grab button separately, or it loosens the grip.
He bent a tooth pulling a log sideways and a stick punctured the forward-facing freeze plug on the tractor, which has no guard over it.