Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A viewer question about which top-link hole to use becomes a genuine teaching moment on draft control, what it is, what it does, and why it matters (or doesn't) for a brush hog versus ground-engaging implements. Mike walks through two real tractors side by side, reads from their owner's manuals, and gives a frank bottom-line answer. Best for newer tractor owners confused by three-point hitch terminology.
Tractor Mike is a longtime tractor-industry insider with decades of hands-on experience in the equipment business. He built his channel to help first-time and rural buyers make confident decisions, and his guidance comes from that deep, long-term background rather than a sales pitch.
If you don't have draft control and aren't using a ground engaging implement, it doesn't matter which hole you use. Put it in whichever hole is easiest to get the pin into.
Draft control senses the pull or resistance on the tractor from a ground engaging implement like a plow and automatically adjusts the implement's height as soil conditions change.
Usually draft control is an option on smaller compact tractors and not standard. Most deluxe tractors from about 55 horsepower and up have draft control from the factory.
Different holes are meant for different draft loads. One manual says the top hole suits light draft implements like brush hogs, while the middle hole suits heavy draft tillage implements.