Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A dealership staffer walks through what a third function valve is, how it's wired from the loader handle back to the hydraulic block, and the real-world steps for hooking up a grapple or auger. Covers Pioneer vs. flat-face couplers, coupler sizing, and, most usefully, how to relieve trapped hydraulic pressure so stuck couplers will connect. Best for first-time third-function owners troubleshooting a grapple hookup.
It's a valve kit adding a third hydraulic function beyond raising/lowering the boom and tilting the bucket, letting you run a grapple, auger, or similar attachment from the loader handle.
Trapped hydraulic pressure builds up from temperature changes or sitting unused, making couplers hard to connect; relieving that pressure lets them plug in properly.
Turn the tractor's electronics on one click without starting the engine, then move the loader and work the buttons until hose pressure releases and droops.
Pioneer couplers are easy on/off but drip five to ten drops of oil each side when removed; flat-face couplers release pressure to connect, leave no mess, and resist dirt.