Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →An official step-by-step oil change tutorial for the Yanmar YT2 series, walking through every stage in order: warm-up procedure, drain plug removal (15mm socket), filter swap with gasket prep, refill (5 quarts), and dipstick check. It also states the service intervals, 50 hours initially, then every 200 hours. At four minutes it moves briskly with no fluff. Best suited to new YT2 owners doing their first oil change.
Initially at 50 hours, then at 200 hours, and every 200 hours afterward.
A 15 millimeter socket and ratchet, turning counterclockwise to remove the drain plug.
5 quarts of engine oil, poured in using an oil funnel.
Apply clean oil to the gasket, install by hand until sealed, then turn an additional half turn with a filter wrench.