Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A short step-by-step procedural video walking through a Yanmar YT2 series engine oil change from start to finish. It covers service intervals (50-hour initial, then every 200 hours), required tools and supplies, drain plug removal, filter swap with gasket prep, refill quantity (5 quarts), and a dipstick check. At about four minutes, it moves briskly with no extra commentary, best for YT2 owners who just want a quick visual reference to follow along.
Initially at 50 hours, then at 200 hours, and every 200 hours afterward.
The video shows pouring 5 quarts of engine oil into the Yanmar YT2 35 tractor using a funnel.
The engine oil filter is located on the front right side of the tractor, removed by turning counterclockwise with a filter wrench.
Remove the dipstick located to the left of the oil filter and make sure oil is between the upper and lower marks, adding oil as needed.