Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a hands-on hookup-to-unhook walkthrough pairing a Frontier RT3081 rotary tiller with a John Deere 5130M, not a spec review or dealer pitch. It covers three-point hitch alignment, PTO driveline connection, top-link tilt angle adjustment, offsetting the tiller for tire clearance, setting and using the depth-stop dial with toggle control, and the unhook process. Best for owners actually running this implement combo who want practical operating technique.
Appears to be an owner-operator demonstrating the process on their own equipment, sharing practical firsthand technique rather than a sales pitch.
Use the dial on the three-point hitch to set a stop point. The hitch will not drop below that depth unless you manually override it to go lower.
Raising the pillar off the ground lets the tines move freely, making it easier to connect the PTO driveline, and helps both latches lock into place.
Yes, offset it slightly to the right since you work more off the right side, so it overlaps the tractor track and does not catch the ground.
Use the toggles to raise the tiller at the end of a row, then push it back down. It will drop to the depth set by the depth stop dial.
