Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a step-by-step how-to on a Kubota BX25D-1 covering just one task: removing and reinstalling the front end loader. It walks through raising the loader, dropping the rear stabilizer arms, pulling pins, disconnecting the color-coded quick-attach hydraulic couplers, and reversing the process to reinstall. No specs, pricing, or general review content. Best for BX owners needing a practical reference for swapping the loader on or off.
Posted by the Nova International Ltd channel, presented as a straightforward instructional walkthrough rather than a sales pitch.
Lift the loader to pull down the rear stabilizers, pull the cotter pin, lower the loader, pull the pins, then raise it again and disconnect the color-coded quick-attach hydraulic couplers.
Start with the yellow coupler at the bottom, then the red one, then the blue one, and finish with the white one.
Drive in slowly, hook up the color-coded hydraulic hoses, drive in fully, put the pins back in place, then raise the loader to reposition the lower stabilizer and pull the cotter pin.
