Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a side-by-side comparison of Deere's 1025R, 2038R, and 3046R mid-mount mowers, run back-to-back by three people who rotate through all three machines. It measures actual turning radius, compares deck lift/height-adjust mechanisms, flags cab heat and anti-scalp wheel scalping issues, and each person states which model they'd personally choose and why. Good for buyers cross-shopping the 1/2/3 series specifically for mowing.
An owner-run channel (Tractor Time with Tim) doing hands-on comparisons with their own tractors and neighbors, including a promoted affiliate product (Yard Swiveler) mentioned mid-video.
Uncut circle diameter was 43 inches with the 1025R, 7 feet 6 inches with the 2038R, and 5 feet 8 inches with the 3046R, showing the 3046R is not much worse than the 1025R.
The engine heat seems to be directed right toward the operator station, which all three testers noticed and became more obvious when switching between the 2R and 3R.
The presenter says on a lawn smaller than about two acres, the 1025R is the best choice, calling it a joy on a smooth lawn and good for working rough areas.
The anti-scalp wheels do not turn, so making a sharp turn into a hill can cause them to create a divot that cuts through the grass, especially in late summer.
