Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a John Deere-branded comparison piece pitting the 5055E against the Kubota MX 5200, built entirely around specs favoring the 5E: hood durability, three-point hitch lift capacity (1.5 tons vs. the MX struggling at 1,800 lbs), power reverser transmission, E-PTO fuel savings, steering component placement, and maintenance intervals (clutch and brake adjustments). It's a point-by-point sales argument, not hands-on footage, best for buyers wanting Deere's framing of the matchup before cross-shopping in person.
Posted by West Central Equipment, a John Deere dealership channel, so the comparison is one-sided in Deere's favor and should be weighed against independent or Kubota-side sources.
The 5055E can lift a ton and a half with its three-point hitch. The Kubota MX 5200 runs out of hydraulic power and loses steering when trying to lift 1,800 pounds.
E-PTO lets you throttle back to 1,600 RPMs while still getting 540 PTO speed on power reverser models. The Kubota needs 2,700 RPMs for the same speed, so the 5E can cut fuel costs up to 30 percent.
In the first 500 hours, the Kubota MX clutch needs adjusting six times versus twice for the 5E. Brakes need five adjustments on the Kubota and zero on the 5E, which has hydraulic brakes.
The 5E has steering components located behind the front axle, protected from hidden obstructions. The Kubota MX puts its steering components upfront, where they are vulnerable to trouble.