Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A dealership staffer uses physical pins, bushings, and a Land Pride bale spear to show hands-on why category one and category two three-point hitch pins are not interchangeable, covering actual pin diameters (7/8" vs. 1-1/8" lower links), the bushing fix when categories don't match, top-link differences, and the side-to-side and height spacing differences between categories. Most useful for newer tractor owners confused about why an implement won't fit or feels sloppy.
It comes down to size and spacing. Category 1 has a three-quarter inch top link spacing and seven-eighths inch lower link pin diameter, while category 2 pins are thicker and the arm spacing is wider and taller.
No. The category 2 pin is thicker and won't fit into the category 1 bushing, so you need to switch the pins to category 1 size or it won't fit properly.
Put a bushing over the category 1 pin, available at Tractor Supply or local dealerships, which makes the pin fit tight in the category 2 hitch. Do the same for the top link.