Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A brief owner-filmed walkthrough of changing the front axle oil on a John Deere 1026R. Covers the drain plug locations, socket sizes (14mm for drain plugs, 4mm Allen for the fill plug), fluid capacity (about 2.8 liters), and a real-world snag: a factory-rounded fill plug requiring a replacement part, with the part number shown on screen. Best for 1026R owners doing this job for the first time.
You need a 14 millimeter wrench or socket to remove the drain plugs on each front tire.
It takes about 2.8 liters, filled to the hash marks, then checked again after running the tractor about seven hours.
A 4 millimeter Allen wrench is used for the fill plug, which can be rounded off from the factory and may need replacing.