Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →Stands out for its focus on a specific hydraulic reconnection problem: quick-connect hoses that become impossible to seat after a large temperature swing. Tony walks through two attempted fixes, using the loader joystick to release pressure, then carefully cracking the hydraulic lines with two wrenches, before demonstrating the float feature for grading. Most useful to owners who've faced stuck quick-connects after seasonal storage.
An owner-operator channel documenting real homestead projects, sharing both the mistakes and the fixes from personal experience.
A significant temperature change, like 50 degrees to 90 degrees, raises pressure in the hoses or expands trapped air, making the quick-connects nearly impossible to seat.
First try the loader joystick to release pressure, then if needed crack one line on the lift cylinder and one on the bucket tilt cylinder using two wrenches.
One wrench holds the fitting steady while the other loosens it, preventing bending or breaking the metal fitting, which would create a permanent leak.
Dropping the bucket and pushing up locks it into float, relieving hydraulic pressure so the bucket rides up and down with the ground, good for grading.
