Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →An owner who used clamp-on pallet forks for years before upgrading to quick-attach shares a practical farewell review. He covers installation technique (including hammer-tightening and the stabilizer bar), the real-world reduced lift capacity caused by pin-distance, bucket-bending risk and how chains prevent it, and visibility limitations, then demonstrates picking up a wood chipper and directly compares the experience to quick-attach forks. Best for first-time buyers weighing cost versus convenience.
An owner-operator sharing hands-on impressions from personal experience on their own property, with no apparent commercial affiliation.
Align the adjustable stabilizer bar first, hand tighten the clamps, then use a hammer to tighten further, finish with a pipe for final squeeze, then tighten the stabilizer bar bolts.
Yes, because the distance from the lift pin to where the fork starts is almost 24 inches, you lose a good bit of lift capacity compared to the tractor's rated capacity.
Yes, the weight can pull down and bend the bucket lip, giving it a smile shape, unless you use chains and load binders around the bucket for support.
Yes, the bucket itself obstructs your view of the fork tips, while quick-attach forks let you see through the framework to the fork ends.
