Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This video stands out for its hands-on, repeated lift-capacity testing of the John Deere 120R loader in both mechanically self-leveling (MSL) and non-self-leveling (NSL) configurations on a subcompact tractor. The host documents actual weight increments, measured lift heights, and hydraulic pressure settings, even redoing the test after identifying a methodology flaw. The surprising finding: real-world lift differences between the two loaders are far smaller than specs suggest. Best for shoppers debating whether the MSL upgrade is worth it.
Real-world testing showed the lift capacity difference between MSL and NSL was much smaller than the spec sheet numbers suggested.
With the bucket held level, the MSL loader lifted about two and a half to three inches less than the non-self-leveling loader, empty or full.
The host reset the pressure to steady at about 2000 PSI, since the first test had it falling back to around 1800 PSI, skewing results.