Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A real-time DIY install of Pat's Easy Change quick hitch on a Category 1 LS tractor, filmed with no prep and only the tools already in the tractor's toolbox. The creator works through actual snags, a missing nut, wrong shims, a stubborn pin needing grinding, making this useful for anyone who wants an honest preview of the fitment quirks rather than a polished walkthrough. Closes with a brief tip on the anti-slip bent washers.
Pull the cotter pin, slide the hitch arm on with shims to level it, tighten the set screws on both sides, then insert the pin through the lower link, grinding it if it catches.
A missing nut, uncertain shim orientation, a pin that wouldn't go through smoothly needing sanding and grinding, and a shim that was too thick and blocked the pin for an hour.
They sit on the ends of the hooks and hold them captive so they can't slide off, installed by passing the lynch pin through the bottom of the bent washer and clipping it over.
The kit shown is Class One, but it is also made in Class Two, which the installer says would really help since hooking up Class Two tractors is a pain.