Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a hands-on depth-testing session on a used John Deere 665 rototiller, measuring how top-link angle, shoe/skid position, and tilt interact to change tilling depth. The owner runs real experiments with a plumb bob and tape measure, testing forward/backward tilt and multiple shoe settings, landing on a practical depth for everyday use. Useful for owners trying to understand how to actually dial in depth control on this implement, not a buyer's overview.
Appears to be an owner or operator working through trial-and-error testing on their own equipment, not a dealer or polished review channel.
Testing showed tilting the top link forward or backward did not actually change the overall depth, it just rotated the tiller to a different angle and height.
The shoes follow the same curve as the rototiller, so raising or lowering them changes the angle where the plumb bob measures, affecting how tilting the top link changes depth.
Lowering the shoes one notch from the highest setting and using top link tilt gave a depth of about three inches, which the owner felt would be plenty for most jobs.