Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A dealership staff member walks through the full remove-and-reinstall sequence for a sled-style backhoe on Kioti Coyote-family tractors (excluding the CS subcompact). The video covers weight transfer onto the stabilizer feet and bucket, pulling the locking pins, relieving hydraulic line pressure before disconnecting, and realigning the subframe on reinstall. Practical and step-by-step, it's most useful for new Kioti owners doing this for the first time.
Put the feet out, drop the bucket to shift weight off the tractor, pull the two locking pins, then drive forward slowly so the subframe slides out of its sockets.
Yes, with the tractor off cycle the rear remote back and forth to take pressure out of the lines before popping the hydraulic lines off.
No, the video says the process is similar for everything in the Coyote family except for the CS subcompact tractor.
Drop the whole backhoe down onto the ground instead of leaving it raised, then shut off the tractor, relieve line pressure, and pull forward.