Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This short clip focuses on a single maintenance point for the Kubota L2502: what happens when loader pivot pins aren't greased regularly, including sheared bolts and binding wear at the cylinder end. It recommends greasing every 10 hours using a basic manual grease gun rather than a battery-powered one. It's a narrow, practical tip rather than a full walkaround, best suited for owners troubleshooting loader wear or setting up a grease schedule.
Posted by the cheap homesteading channel, sharing hands-on, budget-minded maintenance advice from an owner's perspective.
The bolts will shear off at the cylinder end, and the loader will bind up, causing wear in the pin and cylinder areas.
Every 10 hours, according to the video.
No, a basic manual grease gun you likely already have in the garage works fine.
