Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →Focused specifically on debunking the claim that rear wheels must come off to remove the MT25 backhoe, this video walks step-by-step through the actual removal: travel pin, top and bottom mount pins, outrigger placement, and hydraulic hose disconnection including a loop-back hose that affects three-point hitch pressure. It's a concise procedural how-to, most useful to MT25 owners (and similar LS, GC, or Workmaster compact tractor owners) attempting their first backhoe removal.
No. The rumor is false; the rear wheels have nothing to do with backhoe operation or removal at all.
It keeps the backhoe from folding or bending at the pivot point once removed, in case hydraulic pressure leaks down.
A loop-back hose must be reconnected on the right rear of the tractor so the three-point hitch and mower deck lift arms get hydraulic pressure.
Rotate the backhoe deck level and place large wood blocks under the subframe so it will not rest on the ground if lift arms leak down.