Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This video follows a first-time hands-on trial of the Limbsaw attachment, a hydraulic chainsaw that mounts to a tractor's third-function loader, used to trim high limbs along a fence row and brush piles. It covers real-world operation quirks (learning curve, bar pinching, positioning), notes the 2038R lacks sufficient hydraulic flow to run it, mentions the ~$2,100 price with a discount code, and compares two tractors working together. Best for anyone seriously weighing this specific attachment.
No. The 2038R does not have enough hydraulic flow. It makes the saw spin but stalls as soon as it touches the log, since the saw needs seven gallons per minute at the third function.
About twenty-one hundred dollars before discount, or twenty-two ninety-nine. Using the coupon code TTWT for 10 percent off brings it down to around eighteen ninety-nine.
It uses a three inch receiver type tube. You can bolt two receiver tubes onto a fork, or drill four holes in your bucket to attach a receiver directly to the top of it.
There is a learning curve, including a tendency to pinch the bar backwards if you push the saw down too far, but pushing it against something frees it easily.