Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A step-by-step installation walkthrough for the BigToolRack bushing kit and quick hitch, filmed by someone doing the job solo on a real tractor. It covers bushing orientation and pin installation on implements, mounting the quick hitch to the three-point, and briefly explains the top-link adapter's optional use. Ends with a quick mention of a new skid-steer quick hitch. Best for BigToolRack owners about to do this install for the first time.
Pull the old clips off, slide the bushing on with the fat part facing outside, then line up the beveled pin and hammer it through until it sits flush in the hole.
No, nine times out of ten you won't need it for a BigToolRack. It's used for other implements like a snowblower, brush hog, or finish mower that aren't quick hitch compatible.
Yes, once the quick hitch and bushing kit are installed, you can back up and hook up without getting off the seat of your tractor.