Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A dealership staff member walks through the full process of removing and reinstalling the front-end loader on a Mahindra 1526 shuttle shift, covering kickstand deployment, pin removal, backing the tractor off the loader, bleeding hydraulic pressure, disconnecting and reconnecting color-coded quick-connect hoses, and driving back on. It's a straightforward, real-time how-to with no editing polish, best suited for new 1526 owners doing this for the first time.
Posted by Cliff Jones RV & Tractor, a Mahindra dealership in Sealy, Texas, so the presenter is a sales or service staff member rather than an independent owner.
Raise the loader high, deploy the kickstand, pull the arm pins on both sides, back the tractor off slowly, then disconnect the color-coded hydraulic hoses starting with the bottom ones.
Pull the tractor forward evenly into the loader, reconnect the hydraulic hoses starting with green then red then yellow and blue, then reinsert the arm pins and kickstand pin.
The demonstration took about five minutes total, though the presenter notes it gets easier and faster with practice.
