Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is an official John Deere how-to focused on one specific task: maintaining a gravel driveway with a Frontier RB2072 rear blade on a 3038 compact utility tractor. It walks through hitching via iMatch, rotating the blade 360 degrees in 45-degree increments, and running two passes (angled, then perpendicular) to fill ruts and smooth the crown. Best for owners wanting a quick technique demo, not a tractor review or buying guide.
Official John Deere content promoting Frontier implements through their dealer network, so expect a instructional but brand-promotional tone rather than independent testing.
Attach the Frontier RB2072 rear blade using the iMatch hitch, set the blade at 45 degrees to pull gravel from the edges toward the center along each side, then reverse the blade and run it perpendicular down the center to smooth the crown.
Remove the lock pin and adjustment pin, rotate the blade up to 360 degrees in 45-degree increments, then reinsert both pins without unhooking the blade from the tractor.
It has 37 horsepower, a hydrostatic transmission, and a D160 loader with a lift capacity of over 1100 pounds plus a front bucket.
