Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A practical six-minute fix for a specific, common frustration: hydraulic couplers that won't connect after a temperature swing. Neil from Messick's explains why trapped fluid pressure is the culprit, walks through two relief methods (cycling tractor valves first, then cracking a fitting), and covers real safety considerations like fluid injection risk and implement drop hazard. Most useful for owners who've already hit this problem.
Posted by the Messick's Farm Equipment channel, a dealership, so the video ends with a sales and service call-to-action, though the how-to content itself is straightforward and hands-on.
Fluids are uncompressible, so a temperature swing causes pressure buildup inside the hoses, making it too difficult to overcome that pressure when connecting the couplers.
First cycle the tractor's valve or third function control with the engine off to drop pressure on the tractor side. If that fails, loosen the fitting at the manifold until fluid drips out.
Wear safety goggles since fluid is under pressure and fluid injection can injure your hands. Also consider if an attached implement, like a raised loader, could drop when pressure is released.
