Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →An owner-operator explains why adding a Pat's Quick Hitch to a Cat 2 tractor forced him to swap his Magister hydraulic top link from a 12-inch to a 14-inch stroke cylinder. He compares the Magister against a check-valve-equipped competitor he didn't like, walks through hydraulic fitting types (ORB, JIC, pioneer), hose routing, and thread sealing, practical detail that benefits anyone sizing or plumbing a hydraulic top link after adding a quick hitch.
The quick hitch changed the length of the lift arms, adding around four inches, so the 12-inch stroke Magister ran out of cylinder stroke to tilt the box blade back enough.
With heavier implements the check valve chatters badly when lowering, though pulling the cylinder in to shorten the link worked fine; he didn't care for the chattering on extension.
A dash-8 ORB (O-ring boss) port converts to a dash-8 JIC, standard sizing found at any local hydraulic shop, unlike proprietary parts on some competitor cylinders.
Yes, for the swivel eye, though the tolerances are tighter than a normal swivel eye, sometimes making it harder to install or remove a category one bushing.