Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A DIY fix for a specific fit problem with Harbor Freight's three-point quick hitch: the hooks sit too narrow to engage implement pins cleanly. The creator walks through his solution, cutting short steel pins, sanding the edges, and tack-welding them in as spacers, with measurements and steps shown hands-on. Useful for anyone wrestling with the same Harbor Freight quick-hitch fitment issue.
The hooks sit too narrow to engage the pins cleanly, even after widening the bracket with an added spacer and prying it out as far as possible.
Remove the bolts holding the hook, cut a rod into two pins measured to the bracket's outside dimension, sand the edges, and tack-weld them in as spacers.
The creator measured one and three-quarter inches from outside to outside and cut the rod pins to that length.