Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A dealership-developed walkthrough showing their preferred method for assembling a TYM BH200 backhoe from a crate and mounting it on a TYM 20-series tractor, without needing a second machine. It covers crate contents, subframe installation, outrigger placement, and the hydraulic hookup in real detail, including a clear warning about what breaks when you remove the backhoe later. Most useful for someone tackling this job themselves for the first time.
The main feed line to the three-point system gets broken, dead heading the hydraulic pump, so the tractor's hydraulic system will not function.
No. The manual's method needs two machines and two people and is dangerous, but this process only needs the tractor and basic hand tools.
You likely flipped the quick connects to the wrong side. Swap the hoses over and run the loop the other direction to fix flow.
Yes, outriggers are installed first so you can drive the tractor back, hook up hydraulics, and use them to align the backhoe with the subframe.