Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a short, hands-on walkthrough of installing a Land Pride third function valve adapter on a Kubota MX4800 with an LA1065 loader, focused specifically on hooking up the hydraulic hoses correctly since that's the part the owner found confusing. It shows the diverter, hose routing to the valve block, and briefly mentions wiring the switches. Best for owners doing this exact install who want clarity on hose connections, not a full product overview or specs discussion.
Posted by the Soat Mon channel, an owner sharing a DIY install from personal experience on his own tractor.
Tighten the diverter connections first, then route the B side hose around down to the block, and move the hose from the valve to the new connection point on each side.
It is described as a very easy install overall, taking about 30 minutes, though figuring out the hydraulic hose connections was the confusing part.
Yes, you attach electricity to the switches that come with the kit and follow the included instructions on how to wire it up.
