Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A DIY owner walking through a homemade 7-foot snow pusher he fabricated and mounted on a small 25-hp tractor using salvaged materials, a skid-steer adapter plate, and hydraulic cylinders he plans to add for angling. He covers his build decisions, what worked and didn't (clevises, floating action), rough cost breakdown (around $900 total), and a brief field report from actual use. Best for DIY-minded compact-tractor owners curious about a budget build.
The owner estimates about 800 to 900 dollars total, including roughly 200 for the plate, 300 for the pusher, and 680 for the hydraulic cylinders plus hardware.
He tried clevises to make the pusher float but found they did not work at all, so he left a gap in the mount which floats decently instead.
He used two and a half inch cylinders with a 14 inch draw, which he admits may have been overkill for the application.
Yes, he reports it pushed snow back cleanly with none rolling over the top, and the tractor handled it well despite slippery conditions.