Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A brief how-to walkthrough showing the physical steps for attaching loader implements (bucket, grapples, pallet forks) using the front quick-attach bracket, and three-point implements on the rear using the iMatch-style bushing-and-lever system, including a note on PTO connection safety. Also clarifies which pin size applies to different John Deere series. Useful for new owners confused by the basic attachment mechanics, but too short for anyone wanting depth on adjustment or troubleshooting.
Drive in slightly forward so the bracket catches into the hoop, curl the bucket until it goes over the pin, then lock in the locking pin.
Bushings go over the implement pins, lift the lever to unlock the locking lug, lower the three-point, then drive forward away from the implement.
Smaller pins fit John Deere 30, 32, 3E, 2 series, and likely 1 series tractors, while the larger pins fit 4 and 5 series style quick attach systems.
Make sure the pin clicks back in place and is all the way out, or the black pin is all the way forward, so it does not come off.