Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A two-part video covering an ATCO/Eko A-frame quick hitch (priced out at roughly $475 with tax) and a bungee-cord trick for managing hydraulic hoses on a Massey GC after removing the backhoe. The host mounts the hitch, compares it to a Harbor Freight unit, flags a top-link pin fitment issue on the GC, and floats a DIY mod to make the receiver piece swappable across implements. Best for Massey GC subcompact owners weighing this specific hitch.
The A-frame quick hitch runs $379 plus tax, and the duplicate receiving side is $95 plus tax, totaling about $474.75 plus tax.
No, the top link and other pins fit the arms fine, but the included pin does not fit the GC top link. It can be ground down or replaced from Tractor Supply.
Wrap a bungee cord around the hoses a couple times and hook it near the light wire, forming a big loop to keep hoses secure without kinking or pinching.
As you lift up, the two-piece hitch always pulls the implement back to center no matter where you start, so you never have to adjust it manually.