Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a repair shop video, not a tractor overview: a customer's used 5090E came in with a broken joystick cable and snapped grease zerks on the loader. The video walks through removing the cover and old cable, routing the new cable through the firewall grommet, adjusting and securing it with the factory keeper, then retapping and replacing the stripped grease fittings. Useful for 5090E owners facing this exact joystick or loader grease-fitting repair, not general buyers.
Appears to be posted by a dealership or repair shop channel documenting actual service work on a customer's tractor.
Remove the cover, unbolt the old cable from the loader valve, route the new cable through the firewall grommet, attach the clevis with a new pin, center it, then secure with the factory keeper instead of jam nuts.
Use a tap, an 8x27 NPT in this case, to clean up and retap the stripped threads, then screw in a new grease fitting until grease flows through, matching angled or straight fittings as originally installed.
An 8 by 27 NPT tap, with a socket sized at seven sixteenths or eleven millimeter to install the new grease fitting.
