Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a step-by-step, hands-on walkthrough of hooking up a mower deck to a tractor's three-point hitch, not a review of any specific tractor model. It covers connecting lower links, seating the PTO shaft, setting the safety chain, adjusting the top link for terrain follow, leveling the deck to a set mowing height (four inches), and setting RPM/PTO speed and gear before cutting. Best for beginners learning basic hitch-up and setup procedure.
Hook up your lower links first, then your PTO shaft to the tractor, then the safety chain, then work on and adjust your top link.
Leave enough slack so the mower follows the terrain and the back tire does not lift off the ground, but tight enough that you can still lift the implement.
The video sets the mower deck to about four inches off the ground, checking that it measures the same four inches on both sides.
Set RPM to the gear mark icon on the tachometer, which was just over 2100 RPM, putting about 5400 to 5500 RPM at the PTO.