Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →The only YouTube video specifically covering hydraulic transmission fluid changes on the John Deere 5410 manual four-wheel drive, according to the creator. It walks through locating drain plugs, swapping the filter and screen, and filling 11 gallons of trans-hydraulic fluid, including a practical tip: a $12 Tractor Supply tire chain wrench works better than John Deere's $75 filter removal tool. Informal and unscripted, but genuinely useful for 5410 owners tackling this job themselves.
One plug is down near the rear axle area where the backhoe excavator hooks on, and two other plugs share the same oil pan further along.
The system takes eleven gallons of trans-hydraulic fluid, so you need extra buckets ready when draining it.
An adjustable tire chain wrench from Tractor Supply, about twelve dollars, wraps around the filter, grips it, and pulls it off by hand tight.
Yes, rub hydraulic fluid around the new filter seal before installing it because it helps the seal go on better.