Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model โPit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison โWritten guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles โThis video is a narrow how-to on sizing a hydraulic top link, not a tractor review or product walkaround. It walks through actual measurement steps: center-to-center pin distance when retracted, screwing it out to find max extension, then calculating usable travel range (roughly 23 to 27 inches in the example shown) while leaving margin inside the tube. Useful for owners specifically shopping for a replacement or hydraulic top link who need the measuring method.
Posted by the Hardy Brothers Outdoors channel, presented as a practical hands-on demonstration rather than a dealer or manufacturer pitch.
Measure center to center of the pin holes when fully retracted, then unscrew it all the way to find the maximum extended length.
The video suggests leaving about an inch or two inside the tube on both ends so it never extends all the way out during use.
Yes, the video says you can either measure it while it is on the tractor or remove it first, as was done in this example.