Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A focused how-to showing exactly how to initiate a parked regeneration on a John Deere 3046: the required pre-conditions (parking brake, neutral, idle down), which dashboard indicators to watch, how the tractor idles itself up to roughly 2200 RPM, how to monitor soot level, and what to do if the regen runs over three hours. Useful for 3046 owners facing a DPF warning for the first time.
Make sure the temperature gauge is up, parking brake is on, it's in neutral, idle is all the way down, then push and hold the button about 30 seconds.
It slowly idles itself up to about 2200 RPM and sits there while it tries to clean out.
If it runs three hours or more it's probably not finishing and needs the shop. You can raise the throttle slightly to bring RPMs down, then lower it back to idle.
Use the button to scroll through the display options to see the soot level, which is the main thing to watch during the regen.